26 Comments

  1. the_professional18 on February 10, 2021 at 5:22 pm

    Woq you are the first person state side i seen with sp audio..i also love that brand..it is an itilian brand..how do you like there mids and highs..



  2. Noel Brown on February 10, 2021 at 5:22 pm

    Hey bro I got mono d class amp I tried hookin up my mids I only get bass .what am I doin wrong



  3. manuel camarena on February 10, 2021 at 5:26 pm

    I bought 12 gauge CCA wire to power my mids and highs. Is that ok ? Or should I have used OFC ? I felt like it wasn’t a big deal because I’m only running 60w rms JBL 180w max. 900w Kenwood 4 channel amp. What u think?



  4. Levi K on February 10, 2021 at 5:31 pm

    I have a Ford F-150 with 2 12” subs I wanna hear my truck from a block away and all what should I get aftermarket tweeters ? Mid ranger speakers full range ?? WhAt should I get and how many



  5. DBuilt 602 on February 10, 2021 at 5:33 pm

    How do u wire up your amps for mids? How do u get the signal?



  6. willean40 on February 10, 2021 at 5:33 pm

    Ok I have a honda accord and I want to put 4 6.5s and 4 5.25 all at 100rms how many do I really need to have my car loud and crisp clear



  7. Dink Woodham on February 10, 2021 at 5:35 pm

    Should you use a 4 channel or 2 channel for lime 6 6.5 and 2 set of tweets



  8. Jabari Brown on February 10, 2021 at 5:36 pm

    What kinda mid are those in the door with the orange cone



  9. gkartel007 on February 10, 2021 at 5:38 pm

    Hey bro… I’ve been following the channel and watching your videos… I’m doing a project myself and I need a lil advice from you… is there anyway I can DM you to get some advice??? Thanks in advance…



  10. ed elsey on February 10, 2021 at 5:40 pm

    What’s the best way to order the Powerus from you??



  11. SSBBW Lover on February 10, 2021 at 5:41 pm

    Bro thats competition lol



  12. jesse chavez on February 10, 2021 at 5:45 pm

    Bro open ur garage door that’s dangerous



  13. BigSachsy on February 10, 2021 at 5:46 pm

    Bro let me tell you something. I had a 95 jeep Cherokee, 1st car outta high school. Got two jl 8s sealed and a 600 watt sont xplod amp and a Sony deck. Stock door speakers til I blew them then replaced with the wal mart sonys. Bro my mids and highs used to shit pretty much every system I’d heard. Now I have two 12 DC lvl 2s and a 1.2k amp and I miss my old system so much.



  14. Justin Melbourne on February 10, 2021 at 5:46 pm

    And most amps I know of that are class D amps don’t really have tuning range for tweeters or really even door speakers as this skar amp only has a lpf and range is 50-220



  15. Wefki Saleh on February 10, 2021 at 5:47 pm

    OK I have four 6 1/2 inch scar mitts in my car hooked to a 500 W four channel scar amp that puts out 125 W RMS times four at four ohms or I can hook it up to 240 W times two at four ohms bridge I’m afraid if I hook it up to the 240 that they’ll blow my speakers out do you think that’s the case?



  16. Boon Dogg ESP on February 10, 2021 at 5:50 pm

    I have a Audio Control LC4.800 amp . can I run 3 Audison AP1 tweeters @2.7ohms into ch.1 and ch.2 if so would I install the crossovers that are included with the tweeters. Your opinion will be appreciated



  17. Justin Melbourne on February 10, 2021 at 5:55 pm

    Yo fam so if I have 4 resilient sound neo 6.5s I have them running on a 1200.4 200-250rms on each speaker , your saying I would be better off using this skar 2000.1D rather than a b2 rage 1200.4?



  18. Ole School on February 10, 2021 at 5:55 pm

    I’m tone diffuseness so there for my hearing is off and I’m always having to go to someone to fix my sound so it sounds good but i like the fell of bass hitting when its suppose to. so my question is this… do you have a digital number for each speaker so i can set mine to a number instead of sound?



  19. Jeffrey Putnam on February 10, 2021 at 5:59 pm

    Hey man I have some questions about the wiring side of what goes into this, can you get back to me ASAP?



  20. michael segarra on February 10, 2021 at 6:00 pm

    plus you dos a grate job getting the crossover points right wich lets you over power the speaker but not to the damage point thats an other thing you didnt mention



  21. mike colwell on February 10, 2021 at 6:03 pm

    So I have 4 4" svc ds18s in each front door wired in series to 1 ohm then I wired both front doors together to a 2 ohm load so 8 4" mids to 1 channel and 2 8" svc 8s wired to 2 ohm to the 2nd channel…will 10 speakers be ok like that on a 4 channel bridged down to 2 ohm ? It’s a wolfram 250.4 I haven’t powered up the system yet it’s in the build process…



  22. Pinkie Love on February 10, 2021 at 6:04 pm

    seasick, a pillars look bad.. and class d amps pushing mids and highs .lol wrong choice



  23. Andy Narvaez on February 10, 2021 at 6:10 pm

    Aye nice set up bro look I had 50 watt stock speaker and I upgraded them to 300 watt speakers if I add a 4 channel amp will they produce more power and be louder ?



  24. DAVE on February 10, 2021 at 6:13 pm

    Did a custom fabricated 2 horn tweeters hookedup to my JBL CHARGE 3 and it slams like its supposed to do. It sounds very clean ,very loud no problems, no Poppin . Very loud and very Clear. Pyle Horn tweeters 30 watts RMS. Picture coming very soon.



  25. basshead medrano 89 on February 10, 2021 at 6:17 pm

    Did you already have the 15ks man



  26. Rx Tunez on February 10, 2021 at 6:18 pm

    Sorry if you said it but i missed it, what mids are those? Are they custom painted?